Our world is in the state of constant change and evolving. If you want to keep pace of the time and continually transform and challenge yourself you must attend one kind of H3C certificate test to improve your practical ability and increase the quantity of your knowledge. Buying our GB0-371 study practice guide can help you pass the test smoothly. Our Constructing H3C High-Performance Campus Networks exam materials have gone through strict analysis and verification by senior experts and are ready to supplement new resources at any time. We try our best to present you the most useful and efficient information about the test and provide multiple functions and intuitive methods to help the clients learn efficiently. Learning our GB0-371 useful test guide costs you little time and energy. The passing rate and hit rate are both high thus you will encounter few obstacles to pass the test. You can further understand our GB0-371 study practice guide after you read the introduction as follow.

Save time

Our GB0-371 useful test guide materials present the most important information to the clients in the simplest way so our clients need little time and energy to learn our GB0-371 useful test guide. The clients only need 20-30 hours to learn and prepare for the test. For those people who are busy in their jobs, learning or other things this is a good news because they needn't worry too much that they don't have enough time to prepare for the test and can leisurely do their main things and spare little time to learn our GB0-371 study practice guide. So it is a great advantage of our Constructing H3C High-Performance Campus Networks exam materials and a great convenience for the clients.

Free trials

Before the clients purchase our GB0-371 study practice guide, they can have a free trial freely. The clients can log in our company's website and visit the pages of our products. The pages of our products lists many important information about our Constructing H3C High-Performance Campus Networks exam materials and they include the price, version and updated time of our products, the exam name and code, the total amount of the questions and answers, the merits of our GB0-371 useful test guide and the discounts. You can have a comprehensive understanding of our GB0-371 useful test guide after you see this information. Then you can look at the free demos and try to answer them to see the value of our Constructing H3C High-Performance Campus Networks exam materials and finally decide to buy them or not.

Stimulate the real exam

Our GB0-371 study practice guide boosts the function to stimulate the real exam. The clients can use our software to stimulate the real exam to be familiar with the speed, environment and pressure of the real GB0-371 exam and get a well preparation for the real exam. Under the virtual exam environment the clients can adjust their speeds to answer the GB0-371 questions, train their actual combat abilities and be adjusted to the pressure of the real test. They can also have an understanding of their mastery degree of our GB0-371 study practice guide. The clients can use our software to stimulate the real exam at any time and there are no limits for the times of stimulation.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. 在交换机 SWA 上执行 display interface Ethernet 1/0/1 命令后,输出信息如下 :
[SWA]display interface Ethernet 1/0/1
Ethernetl/0/1 current state: UP
PVID: 10
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
Port priority: 0
从以上输出可以判断

A) 带有 VLAN10 标签的数据帧离开端口 Ethemet1/0/1 时会被剥离标签
B) 带有 VLAN20 标签的数据帧不能从端口 Ethemet1/0/1 转发出去
C) 带有 VLAN1 标签的数据侦进入端口 Ethemet1/0/1 时会被丢弃
D) 带有 VLAN10 标签的数据帧进入端口 Ethernet1/0/1 时会被丢弃

2. 下列关于 PIMSM 共享网段 DR 选举过程的表述,正确的有

A) 选举 DR 时,首先比较 Hello 消息的优先级,拥有最高 Hello 消息优先级的路由器将成为该网段的 DR
B) 如果 Hello 消息的优先级相同,则共享网段 Routerid 大的路由器将成为该网段的 DR
C) 如果 Hello 消息的优先级相同,则共享网段接口 IP 地址大的路由器将成为该网段的 DR
D) 选举 DR 后,再选举 BDR ,当 DR 出现故障时, BDR 迅速接替其工作,保障组播流量正常转发

3. 在如图所示的交换网络中,交换机 SWA 上设置 VLAN10 为 Super VLAN , VLAN2 和 VLAN3 为 VLAN10 的 Sub VLAN ,端口 Ethernet1/0/3 为 Trunk 端口, PVID 为 VLAN1 ,允许所有 VLAN 通过；交换机 SWB 上创建 VLAN2~VLAN20 ,端口 Ethernet1/0/4 为 Trunk 端口, PVID 为 VLAN1 ,允许所有 VLAN 通过 SWA 上査看 Ethernet 1/0/3 端口信息,下面显示正确的为

A) [SWA]display interface Ethernet 1/0/3 Ethernet1/0/3 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 2-3,10 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
B) [SWA]display interface Ethernet 1/0/3 Ethernet1/0/3 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 2-3 VLAN permitted: 1 (default vlan), 2-9, 11-4094 Trunk port encapsulation: IEEE 802.1q
C) [SWA]display interface Ethernet 1/0/3 Ethernet1/0/3 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 2 VLAN permitted: 1 (default vlan), 2-9, 11-4094 Trunk port encapsulation: IEEE 802.1q
D) [SWA]display interface Ethernet 1/0/3 Ethernet1/0/3 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 2 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q

4. 关于配置 BPDU 和 TCNBPDU ,说法正确的有

A) AIternate 端口既不会发送配置 BPDU 也不会发送 TCNBPDU
B) 配置 BPDU 通常仅从根端口接收, TCNBPDU 仅从指定端口接收
C) 配置 BPDU 通常仅由根桥周期性发出, TCNBPDU 除根桥外其他网桥都可能发出
D) 配置 BPDU 仅从指定端口发出, TCNBPDU 仅从根端口发出

5. 在如图所示的交换网络中,三台交换机都只有缺省 VLAN 1 ,三台交换机的互联端口都为 Trunk ,且允许所有 VLAN 通过,三台交换机都开启了全局和端口的 GVRP 功能在交换机 SVVA 上创建了 VLAN10 ,在交换机 SWC 上创建了 VLAN20 ,在三台交换机上査看各 Trunk 端口状态信息,下面显示正确的是（选择一项或多项)

A) [SWA]display interface Ethernet 1/0/1 Ethernetl/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
B) [SWB]display interface Ethernet 1/0/2 Ethernet1/0/2 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
C) [SWB]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
D) [SWC]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q

Solutions: