Latest 010-151 exam dumps with real Cisco questions and answers
010-151 Exam in First Attempt Guaranteed
NEW QUESTION # 19
Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?
- A. Cisco Nexus 5596T
- B. Cisco Nexus 5548P
- C. Cisco Nexus 5548UP
- D. Cisco Nexus 5596UP
Answer: A
NEW QUESTION # 20
Refer to the exhibit.
Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
- A. MDS 9513
- B. MDS 9710
- C. MDS 9506
- D. MDS 9509
Answer: B
NEW QUESTION # 21
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
- A. Reseat the mezzanine card connector.
- B. Verify the power source to the equipment.
- C. Verify that power supplies are receiving power.
- D. Check the Cisco IMC for fan faults.
- E. Check for loose HDD cables.
- F. Reseat the DIMMs, CPU, and PCI cards.
- G. Check the CPU sockets for bent pins.
Answer: B,C,F,G
NEW QUESTION # 22
Which three steps do you perform to troubleshoot when a rack server powers on with no video? (Choose three.)
- A. Check the front I/O cable connection to the motherboard.
- B. Check that the front I/O dongle is properly seated.
- C. Reseat the DIMMs, CPU, and PCI cards.
- D. Check for memory subsystem failure.
- E. Verify the power source to equipment.
Answer: A,B,D
NEW QUESTION # 23
What do the small form-factor, x86 64-bit blade servers reside in Cisco branch-office router?
- A. Cisco UCS S-Series Storage Servers
- B. Cisco UCS C-Series Rack-Mount Servers
- C. Cisco UCS Blade Servers
- D. Cisco UCS E-Series Servers
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-e-series-servers/ datasheet-c78-737706.pdf page 3
NEW QUESTION # 24
DRAG DROP
Answer:
Explanation:
NEW QUESTION # 25
Which method is a TCP/IP-based protocol for establishing and managing connections between IP-based storage devices, hosts, and clients?
- A. iFCP
- B. FCoE
- C. iSCSI
- D. FCIP
Answer: C
NEW QUESTION # 26
Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?
- A. SFP+ Ethernet transceiver cable
- B. Ethernet cable
- C. KVM cable
- D. console cable
Answer: D
NEW QUESTION # 27
Which two types of information does the show module NX-OS command display? (Choose two.)
- A. Module status
- B. Module license information
- C. Module ports type
- D. Module IP address
- E. Module type
Answer: A,E
NEW QUESTION # 28
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
- A. Reseat the mezzanine card connector.
- B. Check the CPU sockets for bent pins.
G: Check the Cisco IMC for fan faults. - C. Verify the power source to the equipment.
- D. Verify that power supplies are receiving power.
- E. Check for loose HDD cables.
- F. Reseat the DIMMs, CPU, and PCI cards.
Answer: B,C,D,F
NEW QUESTION # 29 
Refer to the exhibit. Which item does 3 represent?
- A. Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation
- B. Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports.
- C. Operate as dedicated 40-Gbps, QSFP+ uplink ports.
- D. Operate as 40-Gbps QSFP+ ports or as 4 x 10-Gbps SFP+ breakout ports
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/6300-install- guide/6300_Series_HIG/6300_Series_HIG_chapter_01.html
NEW QUESTION # 30
Refer to the exhibit.
Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?
- A. D - Capability Catalog
- B. B - Packages
- C. A - Installed Firmware
- D. E - Management Extension
- E. C - Images
Answer: B
NEW QUESTION # 31
Which two statements about the Cisco Nexus 5596UP switch are true? (Choose two.)
- A. Its power supplies and fan trays are hot-swappable.
- B. It supports up to 96 10G BASE-T ports.
- C. It supports unified ports.
- D. It is offered in a one-rack-unit form factor.
- E. It has one expansion slot.
Answer: A,C
NEW QUESTION # 32
In Cisco UCS C480 M5 server, which PCle slot is the default slot for the rear RAID controller when the rear drive module is used with SAS/SATA drives?
- A. PCle slot 09
- B. PCle slot 12
- C. PCle slot 10
- D. PCle slot 11
Answer: D
NEW QUESTION # 33
Refer to the exhibit.
Which item does 3 represent?
- A. Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation
- B. Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports.
- C. Operate as 40-Gbps QSFP+ ports or as 4 * 10-Gbps SFP+ breakout ports
- D. Operate as dedicated 40-Gbps, QSFP+ uplink ports.
Answer: D
NEW QUESTION # 34
......
Exam Sure Pass Cisco Certification with 010-151 exam questions: https://actualtests.latestcram.com/010-151-exam-cram-questions.html
