2021 HPE6-A66 Dumps PDF - HPE6-A66 Real Exam Questions Answers
Valid HPE6-A66 Test Answers & HP HPE6-A66 Exam PDF
NEW QUESTION 16
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?
- A. 2930F switches
- B. 5406R switches
- C. 2930M switches
- D. 3810M switches
Answer: C
NEW QUESTION 17
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 3-10 feet (1-3 m)
- B. 15-30 feet (5-10 m)
- C. 30-60 feet (10-20 m)
- D. 3 feet (1 m)
Answer: D
NEW QUESTION 18
A customer has some employees that travel to various locations, where these employees will need Wi-Fi access at these locations. Because many of these locations do not have wireless support, the employees will need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be provided by a national phone company USB wireless card which will be connected to AP. The wireless solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.
Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost efficiently?
- A. 303H
- B. 203R
- C. 0
- D. 1
Answer: B
NEW QUESTION 19
A network architect has developed a design for a new Aruba Wi-Fi network that will include a virtual Mobility Master (MM) running the ArubaOS 8.4 operating system that will manage:
* Two clustered 7210 controllers with 600 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
* Wireless IPS
The architect plans on creating user roles and firewall policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MM-VA-50 (X1), LIC-MC-VA-50 (x2). LIC-AP (X675), PEF (x675), RFP (X675)
- B. LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x2), LIC-AP (X675). PEF (X675). RFP <x675)
- C. LIC-MM-VA-1000 (X1). LIC-MC-VA-50 (X1), LIC-AP (x675). PEF (X675), RFP (X675)
- D. LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x1), LIC-AP (x600). PEF (X600), RFP (x600)
Answer: C
NEW QUESTION 20
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?
- A. 56.350 square feet {5,235 square meters)
- B. 338,100 feet {31,410 square meters)
- C. 47.000 square feet {4,365 square meters)
- D. 55.750 square feet {5,175 square meters)
Answer: A
NEW QUESTION 21
Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?
- A. New Campus
- B. New Express Mode
- C. New Site
- D. New Project
Answer: A
NEW QUESTION 22
A customer has over 100 access layer switches. The customer requires user authentication done via the Aruba Dynamic Segmentation feature. What components are required to implement this solution? (Select two.)
- A. AirWave server
- B. enterpnse authentication server
- C. Active Directory server
- D. Aruba APs
- E. Aruba mobility controller
Answer: A,E
NEW QUESTION 23
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 24
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. lAPs in a cluster
- B. Two 7030 mobility controller and campus APs in a cluster
- C. Two 7205 mobility controller and campus APs in a cluster
- D. FRAPs in a cluster
Answer: D
NEW QUESTION 25
Which AP mode allows an AP to operate autonomously?
- A. AM
- B. IAP
- C. RAP
- D. OCAP
Answer: D
NEW QUESTION 26
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 0
- B. 7240XM
- C. 1
- D. 2
Answer: D
NEW QUESTION 27
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be necessary Which console connection cable should the customer purchase for the 555 APs?
- A. RS-232
- B. RJ-45
- C. USB-A
- D. Micro-B USB
Answer: D
NEW QUESTION 28
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?
- A. 3810M series
- B. 8300 series
- C. 5400R series
- D. 6300 series
Answer: A
NEW QUESTION 29
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 20 MHz
- B. 60 MHZ
- C. 10MHZ
- D. 40 MHZ
Answer: B
NEW QUESTION 30
A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs Which switching product should the customer purchase that will provide 24 Smart Rate ports per access layer switch'?
- A. Aruba 2930F
- B. OfficeConnect 1950
- C. Aruba 2540
- D. Aruba 2930M
Answer: D
NEW QUESTION 31
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1,030
- C. 1
- D. 2
Answer: B
NEW QUESTION 32
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
- A. Two 2930M 24-port POE+ switches
- B. One 3810M 40G 8 HPE Smart Rate switch
- C. Two 2930F 24-port POE+ switches
- D. One 2930M 48-port POE+ switch
Answer: D
NEW QUESTION 33
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?
- A. AP power at 100% and a measurement of -65 dBM on the measuring device
- B. AP power at 75% and a measurement of -80 dBM on the measuring device
- C. AP power at 75% and a measurement of -90 dBM on the measuring device
- D. AP power at 50% and a measurement of -65 dBM on the measuring device
Answer: A
NEW QUESTION 34
Which feature does the Aruba AP 555 support? (Select two.)
- A. high density indoor locations
- B. three radios
- C. weather proof and temperature hardened
- D. 802.11ac and lower standards only
- E. desk wall plate mounted
Answer: A,D
NEW QUESTION 35
Which must you perform in IRIS to assign a device to a Design Group?
- A. Drag and drop the device into the Design Group
- B. Right-click the device and select Set Layer Membership
- C. Right-click the device and select Set Design Group
- D. Drag and drop the device into the Site
Answer: A
NEW QUESTION 36
A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?
- A. Order Aruba AP covers for the APs
- B. Paint the APs to match the ceilings or walls
- C. Place the APs above the ceiling and behind the walls
- D. Place a strip of tape over the LEDs
Answer: C
NEW QUESTION 37
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 510s
- B. Two outdoor AP 367s
- C. Multi-mode fiber between campus switches
- D. Two outdoor AP 387s
Answer: B
NEW QUESTION 38
A customer requires a campus core virtualization solution that supports a dual control and management planes, as well as active-active forwarding paths. Which solution would meet the customer's requirements?
- A. VSX
- B. Mesh stacking
- C. Backplane stacking
- D. VSF
Answer: C
NEW QUESTION 39
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?
- A. 10 Gbps
- B. 5 Gbps
- C. 1 Gbps
- D. 2.5 Gbps
Answer: D
NEW QUESTION 40
......
How much Aruba Certified Design Associate Exam costs
- Length of Exam: 90 min
- No of Questions: 52 Questions
- Examination Fees: $180 USD
HPE6-A66 Exam Dumps - PDF Questions and Testing Engine: https://actualtests.latestcram.com/HPE6-A66-exam-cram-questions.html
